Nickel-chromium-tungsten-molybdenum alloy haynes 230 steel round bar
Mill Test Certificate or other you need
Accept customized size
About 45 days after receive your payment
20000 Ton/Tons per Year
Packaging & Delivery
Usually pack in wooden case or according to your request
Shipped in 35 days after payment
Nickel-chromium-tungsten-molybdenum alloy haynes 230 steel round bar
Chemical composition of haynes 230
Principal Features of haynes 230
Excellent High-Temperature Strength, Thermal Stability, and Environment Resistance Haynes 230 alloy is a nickel-chromium-tungsten-molybdenum alloy that combines excellent high temperature strength, outstanding resistance to oxidizing environments up to 2100°F (1149°C) for prolonged exposures, premier resistance to nitriding environments, and excellent long-term thermal stability. It is readily fabricated and formed, and is castable. Other attractive features include lower thermal expansion characteristics than most high-temperature alloys, and a pronounced resistance to grain coarsening with prolonged exposure to high-temperatures.
Easily Fabricated of haynes 230 Haynes 230 alloy has excellent forming and welding characteristics. It may be forged or otherwise hot-worked, providing that it is held at 2150°F (1177°C) for a time sufficient to bring the entire piece to temperature. As a consequence of its good ductility, 230 alloy is also readily formed by cold-working. All hot- or cold-working parts should be annealed and rapidly cooled in order to restore the best balance of properties. The alloy can be welded by a variety of techniques, including gas tungsten arc (GTAW), gas metal arc (GMAW), and resistance welding.
Heat-Treatment of haynes 230 Wrough 230 alloy is furnished in the solution heat-treated condition, unless otherwise specified. The alloy is solution heat-treated in the range of 2150 to 2275°F (1177°C) and rapidly cooled or water-quenched for optinum
properties.Annealing at temperatures lower than the solution heat-treating temperatures will produce some carbide precipitation in 230 alloy, which may marginally affect the alloy's strength and ductility.
Casting of haynes 230 Haynes 230 alloy may be cast using traditional air-melt sand mold or vacuum-melt investment casting foundry practices. Silicon levels at the high end of the specification range are recommended for enhanced fluidity. Castings may be used in either the as-cast or solution-heat-treated condition depending upon property requirements.
Applications of haynes 230 Haynes 230 alloy combines properties which make it ideally suited for a wide variety of component applications in the aerospace and power industries. It is used for combustion cans, transition ducts, flameholders, thermocouple sheaths, and other important gas turbine components. In the chemical process industry, 230 alloy is used for catalyst grid supports in ammonia burners, high-strength thermocouple protection tubes, high-temperature heat exchangers, ducts, high-temperature bellows, and various other key process internals. In the industrial heating industry, applications for 230 alloy include furnace retorts, chains and fixtures, burner flame shrouds, recuperator internals, dampers, nitriding furnace internals, heat-treating baskets, grates, trays, sparger tubes, thermocouple protection tubes, cyclone internals, and many more.
Creep and Stress-Rupture Strength
Haynes 230 alloy is a solid-solution-strengthened material which combines excellent high-temperature strength with good fabricability at room temperature. It is particularly effective for very long-term applications at temperatures of 1200°F (649°C) or more, and is capable of outlasting stainless steels and nickel alloys by as much as 100 to 1 depending upon the temperature. Alternatively, the higher strength of 230 allows for the use of design section thickness as much as 75 percent thinner than lesser alloys with no loss in load-bearing capability.
Haynes 230 alloy is readily welded by Gas Tungsten-Arc (TIG), Gas Metal-Arc (MIG) Shielded Metal-Arc (coated electrodes), and resistance welding techniques. Its welding characteristics are similar to those for Hastelloy X alloy. Submerged-Arc welding is not recommended as this process is characterized by high heat input to the base metal and slow cooling of the weld. These factors can increase weld restraint and promote cracking. Base Metal Preparation The joint surface and adjacent area should be throughly cleaned before welding. All grease, oil, crayon marks, sulfur compounds and other foreign matter should be removed. It is preferable, but not necessary, that the alloy be in the solution-annealed condition when welded. Filler Metal Selection Haynes 230-W filler wire (AWS A5.14, NiCrWMo-1) is recommended for joining 230 alloy by Gas Tungsten-Arc or Gas Metal-Arc welding. Coated electrodes of 230-W alloy are also available for Shielded Metal Arc welding in non-ASME code construction. For dissimilar metal joining of 230 alloy to nickel-, cobalt-, or iron-base materials, 230-W filler wire, Haynes 556 alloy, Hastelloy S alloy (AMS 5838) or Hastelloy W alloy (AMS 5786, 5787) welding products may all be considered, depending upon the particular case. Preheating, Interpass Temperatures and Post-Weld Heat Treatment Preheat is not usually required so long as base metal to be welded is above 32°F (0°C). Interpass temperatures generally should be low. Auxiliary cooling methods may be used between weld passed, as needed, providing that such methods do not introduce contaminants. Post-weld heat treatment is not normally required for 230 alloy.
Haynes 230 alloy is similar in machining characteristics to other solid-solution-strengthened nickel-based alloys. As a group these alloys are classified as a moderate to difficult ot machine; however, it should be emphasized that they can be machined using conventional methods at satisfactory rates. As these alloys will work-harden rapidly, the keys to successful machining are to use slower speeds and feeds, and to take heavier cuts than would be used for machining stainless steels.
Normal Roughing (Turning/Facing) Use carbide C-2/C-3 grade tool Speed : 90 surface feet/minute Feed: 0.010 in./revolution Depth of cut: 0.150 in. Negative rake square insert, 45° SCEA(1) 1/32 in. nose radius. Tool holder: 5° negative back and side rakes. Lubricant: Dry(2), Oil(3) or water-base(4,5)
Finishing (Turning/Facing) Use carbide C-2/C-3 grade tool Speed: 95-100 surface feet/minute Feed: 0.005-0.007 in./revolution Depth of cut: 0.040 in. Positive rake square insert, possible, 45° SCEA, 1/32 in. nose radius. Tool holder: 5° positive back and side rakes. Lubricant: Dry or water-base
Drilling Use high speed steel M-33/M-40 series(6)/or T-15 grade* Speed: 10-15 surface feet/minute (200 RPM maximum for 1/4 in. diameter or smaller) Lubricant: Oil or water-base. Use coolant feed drills if possible Short, heavy-web drills with 135° crank shaft point. Thinning of web at point may reduce thrust. Feed (per revolution) 0.001 in. rev. 1/8 in. dia 0.002 in. rev. 1/4 in. dia 0.003 in. rev. 1/2 in. dia 0.005 in. rev. 3/4 in. dia 0.007 in. rev. 1 in. dia. *Carbide drills not recommended, but may be used in some set-ups.
After Processing And Before Packing
1. Chemical Compositon Inspection
3.Metallurgical Microscope Inspection.
4.Physical Property Inspection
6.Heterogeinity Of Carbides
7.Other test needs by negotitate
Packaging & Shipping
1 Q:Do you accept the sample order? A: Yes, we accept the sample order. If you order the small piece in stock, it is free.
But we do not pay for the freight cost.
2Q: How long is your delivery time? A: Usually 45 to 60 days after your down payment, it also according to the material requirement and the quantity you ordered.
3 Q: What is your terms of payment. A: Payment less or equal 10000USD,100% T/T in advance. Payment more than 1000USD, 30% T/T in advance, balance before shippment. Also accept the L/C at sight.
5.Q:What is your working time? A:Monday-Friday : 8:00AM-17:00PM (Beijing time, GMT+08.00) While by whatsapp you can contact me anytime if I am awake up.
Why US & Contact US
1) Honest: we will strictly adhere to the contract, you will get the exact quality and quantity
from us. We never receive any complain from the clients for the quantity and weight. 2) Competitive price with shipment in time. 3) Strictly control on the quality. 4) More than 16 years experience in the export. 5) Best service after sale: We will be responsible for any disputes and problems occured after
shipment, we assure you that we will be responsible to the end once our service starts.